How to hang a door by yourself to achieve a perfect fit2022/7/22 2:14:56

2022-7-22 02:14| 发布者: msmkmm2012| 查看: 25| 评论: 0

摘要: When you are an apprentice carpenter, how to hang the door is one of the first things you have to learn. However, you didn't acquire carpentry skills, knowing that it comes from experience, right! The ...

When you are an apprentice carpenter, how to hang the door is one of the first things you have to learn. However, you didn't acquire carpentry skills, knowing that it comes from experience, right! The problem is that you have a door that needs to be hung, and your budget is tight. However, there is no need to emphasize, because it is very simple if you follow our steps. The instructions provided in apply to internal or external hanging doors. It can even work in new or old frameworks. Findtopbest browse more related product reviews!

How to hang a door?
Great, you want to replace a door to enhance your indoor or outdoor space. But how do you hang a door? Here you can find two practices, one for the inner door and the other for the outer door.

How to replace the interior door?
Removing inner door
When you want to upgrade your indoor space door, it will be helpful to use a sturdy silencing door or a solid door. Follow the following steps to master the skills of installing new interior doors:

Start by measuring the existing doors and doorframes, and make accurate measurements before removing the hinge pins. After the measurement, you can remove the existing door.
Next, take measurements and mark your new door. Doing this will allow you to see if you need to trim the door to fit in. In most cases, you may need to take some bottom work. To do this, use a table saw or a circular saw to complete the work. But if you don't have either, you can also use a chainsaw.

Put your old door on the new one as a decoration guide. Align the top edges of the two doors, mark the hinge position on the new door, and mark the bottom where it needs trimming.
To mark the hinge position, you can use the speed square to indicate the top/bottom of each hinge.
Measure the distance from the edge of the old door to the edge of each hinge. You can use the exact size for your new door.

Next, pick up the hinges, align them with the marks on the new door, and trace the outline.
Now support your new door and use a utility knife to make mortises on each hinge. Try to keep a steady hand around your curved marks when gouging out this area. Then, with a chisel and utility knife, the wood is constantly scratched and chiseled away.
Next, take a piece of wood and put it on the hinges, and knock them firmly.

For door locks, you can use the door lock mounting fixture to help drill holes in the board to install the lever and latch.
Measure the distance from the top of your lock to the middle of the bolt on the old door. Then, align your mounting fixture with the mark and drill holes with the attached hole saw.
Once you cut off the lever way, delete the hole saw. Next, cut the rest from your underside. Doing so helps to avoid tearing.
Next, use the attached convenient template, if it has a fixture for mortise bolt plate.
Use a chisel to help remove the material of the latch plate. Once finished, seal the exposed wood with a layer of paint that matches your door.
Tighten the lever and bolt in place according to the supplier's instructions.

Next, use the self-centering hinge to fix the hinge with screws, and screw in the screws at the same time.
Now, you can hang the new door in the frame and repeat these steps for the installation of all new interior doors.

Another option is to watch this DIY video about removing and replacing the inner door.

How to replace the exterior door?
Install a pre-hung exterior door.
As you can see, how to hang the door is very simple, as is replacing the outer door. These steps help to hang the pre-hanging exterior door. It's best to measure your old door in order to order a new one according to its size.

Measure your existing doors.
When measuring your old door, you need to measure the height and width, and round it to the whole inch as the size of the new door. For example, your door is 35 inches wide and 79 inches high; You need to order a 36 inch by 80 inch door.

Next, measure the width of the jamb from the back of the interior trim to the back of the exterior trim. When ordering prehung cabinet doors, please consider the width of this door frame. This will help to make the interior decoration flush with the wall by increasing the size of this prick.

In order to measure the rough opening, the interior trim needs to be removed. First, you will measure the opening width between the frame member and the bottom to top opening of the distiller. Next, the measured value is compared with the rough opening requirement of the new door.

Now, if there are stones or bricks around your door, measure the masonry opening (outside). You can make measurements outside the housing. Then trim from your bottom to top.

Compare the dimensions with the prehung cabinet door you plan to hang, which is equipped with a standard two-inch wide brick molding.

There are three choices for different styles.
Choose a door with a wide flat shell, because you can add decorative lines to the existing exterior decorative style.
The second option is to order a standard shape and fill the gap with added wood or wood strips.
Finally, you can order the door without the exterior decorative strip and install it yourself.
How to hang the door by tearing down the old door?
Knock out the hinge pin with a hammer with nails.
Put an old tablecloth on the floor, open the door and take it out.
Next, protect the wall with a wide putty knife and remove the interior from the door frame.
If you want to reuse your decoration, use your utility knife to mark the intersection of your door frame and molding.
Next, slice the joint between the exterior decoration and the wall tile caulking.
Remove the trim from the door post with a pry bar.
Now cut the side pillars with a hand saw, pull them out and pry them open.
To reuse the trim strip, pull out the nails from the back with pliers.
Next, cut a door frame and remove the whole frame.
Prepare the installation threshold.
New threshold
Now that your door frame has been removed, check the frame and sub-floor in the window sill area to see its condition. Replace any rotten wood.
If the new threshold is thinner than the removed threshold, a new threshold area must be created.
Use a two-foot level gauge and set it at the height of the windowsill to clean the carpet when rotating inward.
Use treated wood to build the windowsill area to the correct height, and add shims to level it.
Test the opening by placing your door on the door and keeping it level against the hinged jamb. Adjust accordingly until your frame is upright.
In addition, check to see if your shell is suitable for siding, and if not, trim the chassis or cut the siding. We suggest cutting the siding because it's easier.
Mark the area of your shell that needs trimming, and then remove the door. Trim with circular saw or abrasive belt sander. Once it is level, you can fix it with coated deck screws.
Next, install a waterproof glue belt to protect your windowsill from water damage.
Wrap waterproof tape around the front edge and both sides of the opening to cover the rough threshold.
Put the door back and check if it fits. Now check whether the construction paper around the frame is intact. If not, nail your No.15 sliding bar to the frame. More product reviews: https://www.findtopbest.com

Now you know that the door is suitable for caulking along the threshold and shell and the top of the door. You can use polyurethane caulking agent according to the provided instructions. You may need to use two pipes.
Keep level with the threshold, align the top of the door with the opening, and nail it with galvanized casing nails.
Next, use the bottom corner to vertically hinge the side jam. Now use small square plywood to pad the back of each hinge. Finish with a pair of gaskets, and make sure the door frame stays vertical. Please put gaskets on both sides of the latch side frame to maintain consistency. You can do this with a utility knife.
Once you are satisfied with your fit, you can nail the jamb into the frame where each gasket is located. Next, replace the screws in the hinge with 3-inch screws, and drive a cannulated screw every 16 inches along the top and side of the outer frame.
For further heat insulation, you can fill the expanded foam between the door frame and the door frame.
Once the foam expands, use fiberglass insulation strips to fill the remaining space.
How to install the interior trim on the hanging door?
If you see a gap between the threshold and the floor, cover it with a bevel transition and reinstall or cut a new interior.
Next, press a foam pad stick to the gap between trimming and siding.
Now apply a layer of caulk between your door trim and siding. Be sure to cut it under the windowsill that suits you and fix it on the frame with screws. If the gap is greater than 3/16 inch, use foam pad coated with caulking agent; Use foam liner and apply caulk on it.
Remove the door and apply varnish or dye to the door, molding and door frame.
Once everything is dry, you can hang your door back on the hinge, and the day's work is finished.